Nauja

Active Mount, Fixed installation, ET401 10"

Prekės ženklas: BRODIT

Active mount for fixed installation - Zebra ET401 10" with rugged frame + expansion back

Kodas 713465

Produktas Europos sandėlyje. Pristatymas 3-6 d.d. po apmokėjimo

251,00 € 303,71 € (su PVM)

Be PVM

Klausti apie prekę

Tos pačios serijos prekės

Brodit pedestal mount , 6.5

202010

Pedestal mount 6.5'', total length: 165 mm, with ball and wing nut, AMPS holes

48,50 € be PVM

Brodit Mounting bracket

213457

Mounting bracket, optimized for touch screens, PDAs, taximeter screens and printers

69,75 € be PVM

Brodit wingnut

215670

Wingnut, for Pedestal Mount

26,00 € be PVM

Brodit tripple suction mount

215675

Tripple suction cup holder, 2 x AMPS holes, weight: 459 g

98,50 € be PVM

Brodit mount, MMC, PM, QLn320

215842

Mount, MultiMoveClip, 2'' Pedestal Mount, fits for: QLn320

142,25 € be PVM

Brodit pedestal mount for forklift, L: 172 mm, W: 97 mm

215981

Forklift pedestal mount Lite, length: 172 mm, for rods and tubes from 5 mm to 130 mm thick, width max: 97 mm, AMPS holes, incl: screws, nuts, washers, Allen wrench

106,00 € be PVM

Brodit holder, passiv, VD

216013

Holder, passiv, vibration damper, ABS/Acetal, AMPS holes, fits for: LI3600 Series, DS3600 Series

96,00 € be PVM

Brodit charging station (MOLEX),TC20

216023

Charging station (MOLEX),12/24 V, MOLEX, vibration-resistant, ABS/Acetal, AMPS holes, fits for: TC20 (with pistol grip)

189,75 € be PVM

Brodit vehicle charging station, TS, locking device, M60

216026

Vehicle charging station, tilt swivel, interlock, incl.: vehicle power supply (12/24 V), fits for: M60

171,00 € be PVM

Brodit wall/table mount, Alpha-3RW

216073

Wall/table mount, with MultiMoveClip, ABS/Acetal, fits for: Alpha-3RW

123,50 € be PVM

Brodit charging station (MOLEX), locking, MC3300

216088

Charging station (MOLEX), tilt swivel, interlock, 12/24 V, MOLEX, incl.: Power supply (open cable end), fits for: MC3300

248,50 € be PVM

Brodit charging station, TC21/26

216137

Charging station, desktop, fits for: Zebra TC21/TC26

133,50 € be PVM

Brodit mount, passive

216200

Mount, passive, with lock, fits for: MC3300R

146,00 € be PVM

Brodit voltage converter

216240

Voltage converter, 48 VAC, 12 VDC, fits for: ET5X

159,75 € be PVM

Brodit holder, TS, SM10, SM15

511755

Holder, tilt swivel, fits for: SM10, SM15, SM20 (without protective case)

51,00 € be PVM

Brodit holder, TS, SM10, SM15, SM20

511756

Holder, tilt swivel, fits for: SM10, SM15, SM20 (with protective case)

66,00 € be PVM

Brodit holder, TS, ET5X (10 inch)

511784

Holder, tilt swivel, fits for: ET5X (10 inch)

53,50 € be PVM

Brodit holder, TS, height: 120 mm to 150 mm

511848

Holder, adjustable holder, tilt swivel, ABS/Acetal, fits for: Trays with a height of 120 mm to 150 mm and a thickness of up to 25 mm

84,75 € be PVM

Brodit holder, reinforced, ET5X (10 inch, Rugged Frame)

511914

Bracket, reinforced, ABS, fits for: ET5X (10 inch, Rugged Frame)

172,25 € be PVM

Brodit vehicle charging station, TS, DL-Axist

512833

Vehicle charging station, tilt swivel, incl.: vehicle power supply (12/24 V), fits for: DL-Axist (without protective case)

118,50 € be PVM

Brodit vehicle charging station, TS, DL-Axist

512834

Vehicle charging station, tilt swivel, incl.: vehicle power supply (12/24 V), fits for: DL-Axist (with protective case)

118,50 € be PVM

Brodit charging station (MOLEX),MC55, MC65, MC67

513013

Charging station (MOLEX),10/24 V, MOLEX, incl.: Power supply (open cable end), fits for: MC55, MC65, MC67

109,75 € be PVM

Brodit charging station (MOLEX), TS, SM10, SM15

513756

Charging station (MOLEX), tilt swivel, 10/24 V, MOLEX, incl.: Power supply (open cable end), fits for: SM10, SM15 (with protective case)

124,75 € be PVM

Brodit charging station (MOLEX),with lock, ET5X (10) (protective case)

539892

Charging station (MOLEX),with lock (incl.: two keys), fits for: ET5X (10'') (protective case)

388,50 € be PVM

Brodit charging station (MOLEX),with lock, ET5X (8) (protective case, extension module)

539893

Charging station (MOLEX),with lock (incl.: two keys), order separate: power supply, fits for: ET5X (8'') (protective case, extension module)

413,50 € be PVM

Brodit holder, with lock, ET5X (10) (protective case)

550888

Holder, with lock (incl.: two keys), ABS/Acetal, fits for: ET5X (10'') (protective case)

418,50 € be PVM

Brodit mount, passive, SM10, SM15

710158

Mount, passive, with vibration dampeners, AMPS, fits for: SM10, SM15

106,00 € be PVM

Brodit holder, TS, MC3200

711027

Holder, tilt swivel, fits for: MC3200

51,00 € be PVM

Brodit Passive Holder

711044

Passive holder with tilt swivel, fits for: Ingenico iSMP4

44,75 € be PVM

Brodit holder, TS, interlock, MC3300

711056

Holder, tilt swivel, with lock, display facing the holder, fits for: MC3300 (with pistol grip)

151,00 € be PVM

Brodit mount, passive, SM10, SM15

711157

Mount, passive, AMPS, fits for: SM10, SM15

97,25 € be PVM

Brodit holder, TS, SL10

711159

Holder, tilt swivel, fits for: SL10 (w/o rugged boot)

51,00 € be PVM

Brodit holder, TS

711227

Holder, tilt swivel, fits for: Memor 10

51,00 € be PVM

Brodit holder, TS

711228

Holder, tilt swivel, fits for: Memor 10 (protection boot)

51,00 € be PVM

Brodit vehicle charging station, TS, TC20/25

712029

Vehicle charging station, tilt swivel, cable type: straight, incl: vehicle power supply (12/24 V), fits for: TC20/25 (with extended battery)

118,50 € be PVM

Brodit vehicle charging station, TS, EDA70/EDA71

712085

Vehicle charging station, tilt swivel, cable type: straight, incl: vehicle power supply (12/24 V), fits for: EDA70

128,50 € be PVM

Brodit mount, active, SM10, SM15

712157

Holder, active, AMPS, with cig-plug cable, fits for: SM10 (pistol grip), SM15 (pistol grip)

163,50 € be PVM

Brodit mount, active, SM10, SM15

712158

Holder, active, AMPS, with vibration dampeners, with cig-plug cable, fits for: SM10, SM15

172,25 € be PVM

Brodit vehicle charging station, TS, SL10

712159

Vehicle charging station, tilt swivel, incl.: vehicle power supply (12/24 V), fits for: SL10 (w/o rugged boot)

118,50 € be PVM

Brodit active holder

712210

Active holder with cig-plug - VeriFone V400m

109,75 € be PVM

Brodit Active Mount

712292

Active Mount, for device with Rugged Boot, with a tilt swivel,cig-plug-adapter, 3A, 12/24V, fits for: M3 Mobile SL20

128,50 € be PVM

Brodit charging station (MOLEX), TS, TC20/25

713029

Charging station (MOLEX), tilt swivel, 10/24 V, MOLEX, incl: Power supply unit (open cable end), fits for: TC20/25 (with extended battery)

118,50 € be PVM

Brodit vehicle charging station, TS, TC2X

712151

Vehicle charging station, tilt swivel, incl: vehicle power supply (12/24 V), fits for: TC2X (with protective boot SG-TC2X-BOOT-01)

118,50 € be PVM

Brodit charging station (MOLEX), TS, SM10, SM15

713157

Charging station (MOLEX), tilt swivel, 12/24 V, MOLEX, incl.: Power supply (open cable end), fits for: SM10, SM15 with bumper and pistol grip

163,50 € be PVM

Brodit charging station (MOLEX), TS, VD, SM10, SM15

713158

Charging station (MOLEX), vibration dampeners, tilt swivel, 12/24 V, MOLEX, incl.: Power supply (open cable end), fits for: SM10, SM15 with bumper and pistol grip

172,25 € be PVM

Brodit holder, TS, SL10

713159

Holder, tilt swivel, incl.: Power supply (open cable end), fits for: SL10 (w/o rugged boot)

118,50 € be PVM

Brodit vehicle charging station, TS, SM10, SM15, SM20

721036

Vehicle charging station, tilt swivel, cable type: straight, incl: vehicle power supply (12/24 V), fits for: SM10, SM15, SM20 (with protective case)

139,75 € be PVM

Zebra ET5x Passiv Mount

739267

Zebra ET5x Passiv Mount, 8.4 Module Upgrade, 2 keys included, for robust frame, with/without expansion module/handstrap. AMPS+VESA 75 holes. Module Upgrade Cradle.

192,25 € be PVM

Brodit Passive Mount

741296

Passive Mount, with pring stud locking, compatible with expansion back, handstrap and rugged boot, AMPS, VESA 75, fits for: ET80, ET85

221,00 € be PVM

Brodit Passive Holder

510813

Passive Holder, AMPS, VESA, fits for: F110G5 or older

99,75 € be PVM

Brodit holder, with lock, ET5X (10) (protective case, extension module)

539960

Holder, with lock (incl.: two keys), fits for: ET5X (10'') (protective case, extension module)

433,50 € be PVM

Brodit pedestal mount , 7.5

202011

Pedestal mount 7.5'' with suction cup, total length: 190 mm, with ball and wing nut, AMPS holes

57,25 € be PVM

Brodit charging station (MOLEX), TS, 3-point, TC7X

531707

Charging station (MOLEX), tilt swivel, 3-point, 10/24 V, MOLEX, incl: Power supply unit (open cable end), fits for: TC7X

118,50 € be PVM

Brodit active holder, Zebra ET4x

712320

Cigarette Lighter Adapter, fits for: Zebra ET4x 10'' with Rugged-Frame

193,50 € be PVM

Brodit vehicle charging station, TS, TC53/58

712306

Vehicle charging station, tilt swivel, incl.: vehicle power supply (12/24 V), fits for: TC53/58 (with rugged boot)

128,50 € be PVM

Brodit Pedestal Mount

202024

Heavy duty Pedestal Mount, length: 180mm, with ball head and wingnut, mounting plate 42x50 mm with 4 mm AMPS-holes, loading weight: 3kg

69,75 € be PVM

Brodit Mounting Plate with MultiMoveClip

216461

Mounting Plate with MultiMoveClip, fits for: TM-P8011-101, TM-P8011-121

99,75 € be PVM

Brodit Cig Plug Adapter Kit

216462

Cig Plug Adapter Kit, includes Adapter with 1x USB-A and 1x USB-C Port, Power Cord, Screws and Mounting Clips, fits for: TM-P8011-121, TM-P8011-101, TM-P211

68,50 € be PVM

Brodit Fly Lead Kit

216463

Fly Lead Kit for fixed installation, incl.: Clips and Screws, fits for: TM-P8011-121, TM-P8011-101, TM-P211

84,75 € be PVM

Brodit Passive Holder

216239

Passive Holder, 83x124x58 mm (WxHxD) internal, fits for: Scanner or Devices with Pistol Grip

53,50 € be PVM

Brodit MultiMoveClip

216460

MultiMoveClip, easy mounting solution, AMPS, ABS/Acetal Plastic, color: Black, fits for: TM-P211

97,25 € be PVM

Brodit vehicle charging station, interlock, MC9300

712135

Vehicle charging station, interlock, cable type: straight, incl: vehicle power supply (12/24 V), fits for: MC9300

233,50 € be PVM

Brodit holder, TS, interlock, FZ-A2

541970

Holder, tilt swivel, interlock, fits for: FZ-A2

97,25 € be PVM

Getac lockable Holder Passive

739287

Passive Holder, VESA 75/100, AMPS, compatible with or without handstrap, lockable, 2 Keys, for: F110G6

146,00 € be PVM

Brodit holder, with lock, TC8000

510875

Holder, with closure, fits for: TC8000

156,00 € be PVM

Brodit Pedestal mount, 10

202020

Pedestal mount 10'', total length: 251 mm, with ball and wing nut, AMPS holes

61,00 € be PVM

Brodit Active Holder, USB

721335

Active holder, 12/24V, 3.0A, Tilt Swivel, incl. USB-Cable and cig-plug, order separately: protective boot, fits for: CT30XP

118,50 € be PVM

Brodit Printer Mount

217072

Printer Mount with label roll function, AMPS, fits for: RP4, RP4F

278,50 € be PVM

Brodit holder, interlock, FZ-G1 (hand strap)

541651

Holder, interlock, fits for: FZ-G1 (hand strap)

112,25 € be PVM

Brodit Lock Block Module

216228

Lock module with spring bolt, upgrade module for separate mount, for : ET50, ET51, ET55, ET56, 8'' and 10''.

68,50 € be PVM

Brodit keyboard mount

216059

Keyboard mount, VESA75/100, AMPS

113,50 € be PVM

Brodit pipe mount with mounting plate, 22-31 mm

215792

Pipe Mount / Bar Grip, swivel head plate, 50x42 mm, for round pipes 22-31 mm, AMPS holes

57,25 € be PVM

Brodit Key lock module

216287

Lock block with a key-lock, includes 2 keys, compatible with Module Upgrade holders

76,00 € be PVM

Brodit pedestal mount , 6.5

202019

Pedestal mount 6.5'', with cup holder Mount, total length: 234 mm, with ball and wing nut, AMPS holes

84,75 € be PVM

Brodit mount, MMC, QLn320

215806

Mount, MultiMoveClip, fits for: QLn320

67,25 € be PVM

Active Mount, Fixed installation, lockable, ET401 8"

736464

Active mount for fixed installation, lockable - Zebra ET401 8" with rugged frame + expansion back

303,50 € be PVM

Passiv Mount, ET401 10"

710465

Passive Mount - Zebra ET401 10" with Rugged Frame + Expansion Back

138,50 € be PVM

Passive Mount - Zebra ET401 8"

710464

Passive Mount - Zebra ET401 8" with Rugged-Frame + Expansion Back

132,25 € be PVM

Brodit Vehicle Mount

213476

Vehicle Mount, fits for: Mercedes Benz Actros 4 13-19

69,75 € be PVM

Peržiūrėti

Brodit Pedestal Mount

215888

Heavy Duty Pedestal Mount, max. width: 87mm, length: 114mm

200,71 € be PVM

Peržiūrėti

Brodit pedestal mount for forklift, L: 140 mm, W: 72 mm

215978

Forklift pedestal mount Lite, length: 140 mm, for rods and tubes from 5 mm to 130 mm thick, width max: 72 mm, AMPS holes, incl: Screws, nuts, washers, Allen wrenches

104,56 € be PVM

Peržiūrėti

Brodit pedestal mount for forklift, L: 140 mm, W: 97 mm

215980

Forklift pedestal mount Lite, length: 140 mm, for rods and tubes from 5 mm to 130 mm thick, width max: 97 mm, AMPS holes, incl: screws, nuts, washers, Allen wrenches

107,40 € be PVM

Peržiūrėti

Brodit mount, MMC, QLn420

216004

Mount, with MultiMoveClip, ABS/Acetal, AMPS holes, fits for: QLn420

76,35 € be PVM

Peržiūrėti

Brodit holder, passiv

216012

Holder, passiv, ABS/Acetal, AMPS holes, fits for: LI3600 Series, DS3600 Series

65,56 € be PVM

Peržiūrėti

Brodit charging station (MOLEX), MC3300

216085

Charging station (MOLEX), 10-30 V, MOLEX, incl.: Power supply (open cable end), fits for: MC3300 with pistol grip

181,36 € be PVM

Peržiūrėti

Brodit holder, with lock, L10

216098

Holder, with lock (incl.: two keys), fits for: L10, order separately: XDIM module

192,01 € be PVM

Peržiūrėti

Brodit holder, TS, TC5X

511926

Holder, tilt swivel, fits for: TC5X (with protective case)

51,45 € be PVM

Peržiūrėti

Brodit holder, TS, with lock, ET50 (8), ET55 (8)

539777

Holder, tilt swivel, with lock (incl.: two keys), fits for: ET50 (8''), ET55 (8'')

97,65 € be PVM

Peržiūrėti

Brodit charging station (MOLEX),with lock, ET5X (8) (protective case)

539894

Charging station (MOLEX),with lock (incl.: two keys), fits for: ET5X (8'') (protective case)

375,01 € be PVM

Peržiūrėti

Brodit holder, with lock, ET5X (8) (protective case)

539961

Holder, with lock (incl.: two keys), USB, power supply port, fits for: ET5X (8'') (protective case)

430,51 € be PVM

Peržiūrėti

Brodit charging cradle, USB, ET5X (10)

563914

Charging cradle, USB, fits for: ET5X (10'', with protective case), to be ordered separately: Power supply

404,56 € be PVM

Peržiūrėti

Brodit vehicle holder

710266

Vehicle holder, drilling: AMPS, VESA 75, module upgrade, order separately: vehicle mount, fits for: ET5X (10.1'' with rugged frame)

145,65 € be PVM

Peržiūrėti

Brodit vehicle holder

710267

Vehicle holder, drilling: AMPS, VESA 75, module upgrade, order separately: vehicle mount, fits for: ET5X (8.4'' with rugged frame)

139,65 € be PVM

Peržiūrėti

Brodit holder, TS, TC20/25

711029

Holder, tilt swivel, fits for: TC20/25 (with extended battery)

51,45 € be PVM

Peržiūrėti

Brodit holder, TS, interlock, MC3300

711040

Holder, tilt swivel, interlock, fits for: MC3300 (with pistol grip)

152,10 € be PVM

Peržiūrėti

Brodit holder, TS, UL20

711171

Holder, tilt swivel, fits for: UL20

87,30 € be PVM

Peržiūrėti

Brodit holder, TS, TC21, TC26

711197

Holder, tilt swivel, fits for: TC21, TC26

51,45 € be PVM

Peržiūrėti

Brodit vehicle charging station, TS, TC20/25

712019

Vehicle charging station, tilt swivel, cable type: straight, incl: vehicle power supply (12/24 V), fits for: TC20/25

119,41 € be PVM

Peržiūrėti

Brodit vehicle charging station, TS, EDA51

712099

Vehicle charging station, tilt swivel, cable type: straight, incl: vehicle power supply (12/24 V), fits for:Honeywell EDA51

119,41 € be PVM

Peržiūrėti

Brodit vehicle charging station, MC9300

712134

Vehicle charging station, cable type: straight, incl: vehicle power supply (12/24 V), fits for: MC9300

204,46 € be PVM

Peržiūrėti

Brodit charging station (MOLEX),TC2X

713151

Charging station (MOLEX),12/24 V, MOLEX, ABS/Acetal, AMPS holes, fits for: TC2X (with protective boot SG-TC2X-BOOT-01)

119,41 € be PVM

Peržiūrėti

Brodit vehicle charging station, TS, Tab Active 2, Tab Active 3

712224

Vehicle charging station, tilt swivel, cable type: straight, incl: vehicle power supply (12/24 V), fits for: Galaxy Tab Active 2 (SM-T390/SM-T395), Samsung Galaxy Tab Active 3 (SM-T570/SM-T575)

100,96 € be PVM

Peržiūrėti

Brodit charging station (MOLEX), TS, EDA70

713085

Charging station (MOLEX), tilt swivel, 10/24 V, MOLEX, incl: Power supply unit (open cable end), fits for: EDA70

128,71 € be PVM

Peržiūrėti

Brodit Active charging station

713197

Charging station (MOLEX), tilt swivel, 10/24 V, MOLEX, incl.: Power supply (open cable end), fits for: TC21, TC26

119,41 € be PVM

Peržiūrėti

Brodit charging station (MOLEX), TS, Tab Active 2, Tab Active 3

713224

Charging station (MOLEX), tilt swivel, 10/24 V, MOLEX, incl: Power supply unit (open cable end), fits for: Galaxy Tab Active 2 (SM-T390/SM-T395), Samsung Galaxy Tab Active 3 (SM-T570/SM-T575)

122,26 € be PVM

Peržiūrėti

Brodit vehicle charging station

713266

Vehicle charging station, drilling: AMPS, VESA 75, Module Upgrade, order separately: vehicle mount, vehicle adapter, fits for: ET5X (10.1'' with rugged frame)

301,36 € be PVM

Peržiūrėti

Brodit vehicle charging station

713267

Vehicle charging station, drilling: AMPS, VESA 75, module upgrade, order separately: vehicle mount, vehicle adapter, fits for: ET5X (8.4'' with rugged frame)

295,21 € be PVM

Peržiūrėti

Brodit charging station (MOLEX), TS, XCover Pro

727214

Charging station (MOLEX), tilt swivel, 10/24 V, MOLEX, incl.: Power supply (open cable end), fits for: XCover Pro (with OtterBox uniVERSE)

128,71 € be PVM

Peržiūrėti

Brodit vehicle charging station, lockable

736266

Vehicle charging station, drilling: AMPS, VESA 75, lockable, Module Upgrade, incl.: 2 keys, order separately: vehicle mount, vehicle adapter, fits for: ET5X (10.1'' with rugged frame)

355,36 € be PVM

Peržiūrėti

Zebra ET5x 10.1 Module Upgrade

739266

Zebra ET5x Passiv Mount lockable, 10.1 Module Upgrade, 2 keys included, for robust frame, with/without expansion module/handstrap. AMPS+VESA 75 holes. Module Upgrade Cradle.

199,81 € be PVM

Peržiūrėti

Brodit Active Mount

747267

Active Mount, for devices with Rugged Frame, with or without expansion module / handstrap, order separately: power supply, USB-A Host, Upgrade Module, fits for: ET5x (8'')

336,91 € be PVM

Peržiūrėti

Brodit Pedestal mount, 6

215838

Pedestal mount 6'', total length: 164 mm, round base, AMPS holes

120,90 € be PVM

Peržiūrėti

Brodit USB-Hub for ET5x

216258

USB-Hub for ET5x, 3x USB-A, 1x Ethernet, fits for: Module upgrade cradles

104,85 € be PVM

Peržiūrėti

Brodit vehicle charging station, TS, USB host, TC5X

712049

Vehicle charging station, tilt swivel, with USB host connection, cable type: straight, incl: vehicle power supply (12/24 V), fits for: TC5X (with protective case)

181,05 € be PVM

Peržiūrėti

Brodit pedestal mountr, 5.0

202016

Pedestal mount 5'', Total length: 132 mm, With ball and wing nut, AMPS holes

48,75 € be PVM

Peržiūrėti

Brodit power supply, open cable end, ET5X

941012

Power supply unit, MOLEX, open cable end, input and output voltage: 12 V, 3A, fits for: Brodit charger for ET5X

84,75 € be PVM

Peržiūrėti

Brodit vehicle mount

711307

Vehicle holder, tilt swivel, fits for: TC53/58

52,50 € be PVM

Peržiūrėti

Brodit vehicle power supply, ET5X

941017

Vehicle power supply, input and output voltage: 12 V, 3A, fits for: Brodit charger for ET5X

84,75 € be PVM

Peržiūrėti

Brodit Passive Mount

739318

Passive Mount, Module Upgrade, Lock incl. 2 keys, compatible with Rugged Boot or Exoskeleton, AMPS, VESA75 fits for: ET40/ET45 (8'')

147,76 € be PVM

Peržiūrėti

Brodit holder, ZQ630

216113

Holder, fits for: ZQ630

90,45 € be PVM

Peržiūrėti

Brodit charging station (MOLEX), MC9300

713134

Charging station (MOLEX), 12/24 V, MOLEX, incl.: Power supply (open cable end), fits for: MC9300 with pistol grip

235,06 € be PVM

Peržiūrėti

Brodit Pedestal Mount

215836

Pedestal Mount with wingnut, length: 62 mm, round base, square mounting plate 50x50mm, color: Black

93,60 € be PVM

Peržiūrėti

Brodit Power Supply

941026

Power Supply, 220V, 5,4V output, with 6-Pin Molex, incl. EU, UK, US, AUS

58,50 € be PVM

Peržiūrėti

Brodit pedestal mount for forklift, L: 172 mm, W: 72 mm

215979

Forklift pedestal mount Lite, length: 172 mm, for rods and tubes from 5 mm to 130 mm thick, width max: 72 mm, AMPS holes, incl: screws, nuts, washers, Allen wrench

104,56 € be PVM

Peržiūrėti

Brodit Passive Mount

739301

Passive Mount, with key-lock, incl. 2 keys, only compatible with rugged boot, AMPS, VESA 75, fits for: ET80, ET85

207,60 € be PVM

Peržiūrėti

Brodit dual suction mount

215671

Dual suction cup holder, 2 x AMPS holes, weight: 326 g

76,35 € be PVM

Peržiūrėti

Brodit Mounting Plate

215987

Mounting Plate, aluminum, VESA 75 and 100 holes

39,75 € be PVM

Peržiūrėti

Samsung tabletop holder

216080

Tabletop holder, fits for: Samsung Galaxy Tab Active Pro

389,26 € be PVM

Peržiūrėti

Brodit pipe mount with mounting plate, 31-50 mm

215944

Pipe Mount / Bar Grip, swivel head plate, 50x42 mm, for round pipes 31-50 mm, AMPS holes

63,30 € be PVM

Peržiūrėti

Brodit holder, TS, MC55, MC65, MC67

511013

Holder, tilt swivel, fits for: MC55, MC65, MC67

45,30 € be PVM

Peržiūrėti

Brodit passive mount, Datalogic Memor 30, 35

711422

Brodit passive mount, tilt swivel, fits for: Datalogic Memor 30, 35

51,45 € be PVM

Peržiūrėti

Brodit holder, tilt swivel

711002

Holder, tilt swivel, fits for: Samsung Galaxy Tab Active 2

67,05 € be PVM

Peržiūrėti

Brodit Universal Scanner mount

217068

Universal Scanner mount, for wall mounting

43,95 € be PVM

Peržiūrėti

Brodit pipe mounting system

215794

Pipe mounting system, incl.: mounting plate

51,00 € be PVM

Peržiūrėti

Brodit Passive Mount

739320

Passive Mount, Module Upgrade, Lock incl. 2 keys, compatible with Rugged Boot or Exoskeleton, AMPS, VESA75 fits for: ET40/ET45 (10'')

150,61 € be PVM

Peržiūrėti

Brodit vehicle charging station, TS, CT50

560805

Vehicle charging station, tilt swivel, cable type: straight, incl: vehicle power supply (12/24 V), fits for: CT50

119,41 € be PVM

Peržiūrėti

Brodit Active Mount

713292

Active Mount, for device with Rugged Boot, with a tilt swivel, open cable end, 3A, 12/24V, fits for: M3 Mobile SL20

128,71 € be PVM

Peržiūrėti

Brodit Mounting plate, L-Bracket

217052

Mounting plate, L-Bracket, for Zebra Machine Vision, fits for: VS70, VS40, VS20, FS70, FS40, FS20

46,80 € be PVM

Peržiūrėti

Brodit Active Mount

747329

Active Mount, USB-Host, spring stud locking, tilt swivel, pogo plug, 12/24 Volt, fits for: Samsung Galaxy Tab Active 4 Pro SM-T630/SM-T636

217,51 € be PVM

Peržiūrėti

Brodit holder, TS, height: 140 mm to 195 mm

511849

Holder, adjustable holder, tilt swivel, ABS/Acetal, fits for: Trays with a height of 140 mm to 195 mm and a thickness of up to 25 mm

87,25 € be PVM

Peržiūrėti

Active Mount, Fixed installation, lockable, ET401 10"

736465

Active mount for fixed installation, lockable - Zebra ET401 10" with rugged frame + expansion back

310,21 € be PVM

Peržiūrėti

Active Mount, cigarette lighter plug, ET401 10"

712465

Active mount with cigarette lighter plug - Zebra ET401 10" with rugged frame + expansion back

237,61 € be PVM

Peržiūrėti

Active Mount, Fixed installation, lockable, USB-Host, ET401 10"

736455

Active mount for fixed installation, lockable + USB HOST - Zebra ET401 10" with rugged frame + expansion back

360,61 € be PVM

Peržiūrėti

Active Mount, Fixed installation, USB-Host, ET401 10"

713455

Active mount for fixed installation + USB HOST - Zebra ET401 10" with rugged frame + expansion back

302,41 € be PVM

Peržiūrėti

Papildoma informacija

Garantija: 12
Gaminio serija: Brodit mounting solutions

Priedai

brodit_befestigungssysteme

Atsisiųsti (19.12M)